Lemoine RTM® (Real Time Machining) offers highly automated processes for:
Gundrilling in configurations up to 9 axes, multi-axis automatic drilling for palletized machining centres, 2 through 5 axis machining with management of multi-face, multi-pallet tombstone machining.
RTM provides for shop-floor programming of all drilling and milling operations, drastically reducing cam hours by including them inside the machining process. A CNC operator using RTM can produce all the required 2.5D and 3D cutter paths in safe, simple and interactive way – in a single environment with the same data. With RTM it is possible to create a paperless process in the workshop while stopping errors associated with misinterpreted data, and manual data input.
The “Pattern Drilling” module recognizes 3D hole geometry (solid, surface or wireframe data) and associates to them to “patterns” inside a customizable database. RTM then automatically creates the required tool paths and outputs the appropriate cycles. Gundrilling includes an option to automatically slow feeds and speeds at intersecting holes, while taking into account the order at which the holes were drilled. This function will reduce tool breakage and wear on all tooling while allowing the user to confidently use high speed drilling technologies.
The “Pocket Manager” module can automatically recognize the pockets to be machined – without the need to extract features from a solid model. Pocket geometries can be modified and programmed using a customizable database much the same as the Drill manager.
The “Surface Machining” module (with up to 5 axis positioning) has made advancements in several categories. The new stock model has greatly improved the quality of the re-roughing and finish machining. A new graphic tree continues to simplify toolpath management. Both pencil milling (drag cut) and bi-tangency re-machining (flow cut) can be calculated with flat, bull-nose and ball-nose tools, using either a reference tool or to the current stock model.
The HSM capabilities achieve extraordinary surface finish of complex 3d shapes (with bull-nose, and ball-nose tools) vastly reducing the polishing time. The Lemoine “Multi Axes” advanced simultaneous 5 axis machining module strengthens the already existing functions in RTM and put at user’s disposal a lot of 4/5 continuous axis functionalities.
Gundrilling in configurations up to 9 axes, multi-axis automatic drilling for palletized machining centres, 2 through 5 axis machining with management of multi-face, multi-pallet tombstone machining.
RTM provides for shop-floor programming of all drilling and milling operations, drastically reducing cam hours by including them inside the machining process. A CNC operator using RTM can produce all the required 2.5D and 3D cutter paths in safe, simple and interactive way – in a single environment with the same data. With RTM it is possible to create a paperless process in the workshop while stopping errors associated with misinterpreted data, and manual data input.
 |
||||||
|
||||||
|
The “Pattern Drilling” module recognizes 3D hole geometry (solid, surface or wireframe data) and associates to them to “patterns” inside a customizable database. RTM then automatically creates the required tool paths and outputs the appropriate cycles. Gundrilling includes an option to automatically slow feeds and speeds at intersecting holes, while taking into account the order at which the holes were drilled. This function will reduce tool breakage and wear on all tooling while allowing the user to confidently use high speed drilling technologies.
The “Pocket Manager” module can automatically recognize the pockets to be machined – without the need to extract features from a solid model. Pocket geometries can be modified and programmed using a customizable database much the same as the Drill manager.
|
||||||
|
||||||
|
The “Surface Machining” module (with up to 5 axis positioning) has made advancements in several categories. The new stock model has greatly improved the quality of the re-roughing and finish machining. A new graphic tree continues to simplify toolpath management. Both pencil milling (drag cut) and bi-tangency re-machining (flow cut) can be calculated with flat, bull-nose and ball-nose tools, using either a reference tool or to the current stock model.
The HSM capabilities achieve extraordinary surface finish of complex 3d shapes (with bull-nose, and ball-nose tools) vastly reducing the polishing time. The Lemoine “Multi Axes” advanced simultaneous 5 axis machining module strengthens the already existing functions in RTM and put at user’s disposal a lot of 4/5 continuous axis functionalities.
LEMOINE EUROPE S.R.L. Via Caduti di Sabbiuno, 1 40011 Anzola dell'Emilia (BO) Italy - phone +39 051 732925 / fax +39 051 6508100 - Partita I.V.A. 08267030016